TECH SPECIFICATIONS
Inputs:
3 x RCA
2 x XLR
2 x arbitrary
1 x Bypass RCA (switchable to IN4-XLR)
Outputs:
2 x RCA
2 x XLR
1 x Monitor / Tape Record (RCA)
XLR Transmission Ratio: 0 dB
XLR Pin Assignment:
Pin 1 = Ground
Pin 2 = Positive
Pin 3 = Negative
Line Stage:
Output Resistance: 100 / 300 ohms RCA; 150 ohms XLR
Monitor Out Output Resistance: 240 ohms
Maximum Output Voltage: 12V
Gain Factors:
Gain High: 25 dB = 18.5
Gain Med: 18 dB = 7.8
Gain Low: 12 dB = 4
Signal-to-Noise Ratio (at 3 V output voltage):
Gain High: -98 dB / 38 µV
Gain Med: -104 dB / 18 µV
Gain Low: -110 dB / 8 µV
Equivalent Noise Level: 14 nV √Hz
Frequency Response:
Gain High-RCA: 10 Hz – 200 kHz, -0.7 dB, 0.7 MHz -6 dB
Gain Med-RCA: 10 Hz – 200 kHz, -0.3 dB, 1.3 MHz -6 dB
Gain Low-RCA: 10 Hz – 200 kHz, -0.2 dB, 2.1 MHz -6 dB
Frequency Response XLR: 10 Hz – 200 kHz, -1.5 dB
Ramp-up Time Gain Low: 250 ns
Ramp-up Time Gain Low: 60 V/µs
Total Harmonic Distortion (at 3V on 10 kOhm):
Gain Low, Med, High: 0.01%
Channel Separation (Input Short-Circuited): -90 dB / 1 kHz
Crosstalk Between Inputs:
RCA: -80 dB / 1 kHz
XLR: -95 dB / 1 kHz
Input Resistance: 50 kOhm
Channel Matching via Volume Control: 0.5 dB – 70 dB
Phono:
RIAA Equalization Tolerance: 0.3 dB / 15 Hz – 20 kHz
Corner Frequency – Subsonic Filter: 15 Hz / -3 dB
Signal-to-Noise Ratio:
Without IN 2 MC Input: -75 / -84 dB
With IN 2 MC Input: Depending on Gain MC Gain Low – Pre Out
Input Sensitivity:
Without IN 2 MC Input: 250 µV / 600 µV
With IN 2 MC Input: Gain MC Gain Low – Pre Out: 70 dB, Med: 77 dB, High: 83 dB; Gain MC Gain High – Pre Out: Gain Low: 79 dB, Med: 86 dB, High: 92 dB
Input Sensitivity, Gain, and Input Resistance Depend on Input Module
General Facts:
Power Consumption: 35 – 60 W
Weight Preamplifier: 10 kg
Weight Power Supply: 3.8 kg
Supplied Accessories: Power Cable, Remote Control
Dimensions of Preamplifier (Overall): 462 x 130 x 480 mm (W x H x D)
Dimensions of Power Supply (Overall): 110 x 90 x 277 mm (W x H x D)
Reviews
There are no reviews yet.